3
How to Configure a RiP routing protocol with simple two routers
How to Configure a RiP routing protocol with simple two routers

How to configure a rip routing protocol with a simple toplogy in GNS 3 to check the connectivity between hosts. Step 1 :Create a topolog...

Read more »

0
How to Configure Qemu Host with linux Microcore Image to Work with Gns 3 Topology
How to Configure Qemu Host with linux Microcore Image to Work with Gns 3 Topology

Here we see how to configure qemu host with linux microcore image to work with a gns 3 topologies.First download linux microcore image D...

Read more »

5
How to configure an  ip address in Qemu Microcore GNS 3
How to configure an ip address in Qemu Microcore GNS 3

Here we are going to see how to configure ip address ,default gateway ,,hostname, checking routing table ,and checking ip address on etherne...

Read more »

3
What is an Ip Address and its Classes Public and Private
What is an Ip Address and its Classes Public and Private

Ip address classes, Class A,B,C,D,E.Ip address is 32-bit binary address dotted decimal 4 Octets  8-bit each 32-bit (4-bytes) 8-bit(1-...

Read more »

3
How to Assign Password for privileged Mode,line vtyand line console
How to Assign Password for privileged Mode,line vtyand line console

How to assign password for privileged mode,console and telnet. Setting Password for Privileged mode.Go to global configuration mode and ...

Read more »

0
How to Assign Host Name to a Router
How to Assign Host Name to a Router

How to Assign hostname to a router Go to global configuration mode and enter this command Router> Router>enable Router#conf...

Read more »

4
How to Configure Default Route to the Routers
How to Configure Default Route to the Routers

Here we are going to see how to configure default route in a routers ,we can configure default route for stub network. i.e dead end route...

Read more »

2
How to Configure Static Route using Packet Tracer
How to Configure Static Route using Packet Tracer

How to configure static routing using three routers in packet tracer Steps: Step 1: Configure ip address to all interfaces with ip ...

Read more »

28
How to Configure a Simple Static Routing in Packet Tracer
How to Configure a Simple Static Routing in Packet Tracer

 How to configure a simple static routing in packet tracer using a simple topology with two routers here we go Steps: Step 1:First Cr...

Read more »

1
How To Configure Ip Address on PC In Packet Tracer
How To Configure Ip Address on PC In Packet Tracer

How to apply ip address,Subnet Mask ,Default Gateway in Packet Tracer  Steps:  Step 1:Double Click the PC Icon Move to config tab and...

Read more »
 
 
Top